Rolling racks
L-shaped garment rack — 500 lbs
A corner steel rack on casters that turns the angle of a bedroom and folds flat when you need the floor back.
Checked when this page was written; the store page carries the number that counts.
| Footprint and height | 82.7" wide × 17.7" deep × 71" tall |
| Static load rating | 500 lbs |
What it is on the floor
Corners in small bedrooms usually end up wasted or blocked by furniture that cannot open. We built this rack to bend into that bend, giving your jackets and laundry a proper run along perpendicular walls. When moving day arrives, the frame swings together and lies flat.
Turning the corner
The frame pivots into an angle to wrap into room corners or shallow alcoves. You gain hanging space along both walls without choking off the doorway or crowding the center of the room.
Steel on smooth casters
Rubber casters carry the loaded rack across rugs and bare floorboards without catching. Step down on the wheel levers when you want the frame parked, then release them to roll shirts straight to the iron.
Rods and bottom shelf
Heavy winter coats, dense denim, and work shirts hang along the main rod without crowding your floor. Down below, the bottom shelf holds storage bins, luggage, or rows of boots.
Collapses without tools
The joints snap together by hand so you skip the wrench entirely. If you need to clear the room for company, the steel poles pivot flat to slip under a bed or behind a door.
